UltraArc 205 200 Amp Pulse DC TIG Stick 50 Amp Plasma Cutter Combo Dual Voltage

The Ultra-Arc 205 combines digital reliability and control with a simple, intuitive users interface. As a replacement for the Power-Ultra line of DC TIG, Stick and Plasma multi-process welders, the new Ultra-Arc features improved and additional TIG features, more Stick features, and a stable digitally controlled plasma cutter.

As far as TIG features go, it is close in comparison to the top tier DC Power i-TIG 200T. Features are similar, but with a simplified adjustment process for TIG Pulse, featuring three field tested Pulse Programs which allow the user to adjust frequency, but rely on solid, proven pre-programmed settings for Pulse amps and Pulse Time on. This allows almost anyone to operate the pulse with little additional instruction or explanation. In Stick mode, well, adjustable hot start and arc force are two popular features that improve stick performance over the older Power-Ultra series with up to 5/32" electrode capability (depending upon the class rod, some may only be 1/8" max). Of course, with new digital control of the Plasma, cutting quality has been improved over previous models.

What's really a great addition though, are two TIG features that are commonly used in the Automotive and fabrication industry. The first feature is a spot timer.

This allows the user to set and control the amount of time the arc stays on while performing spot weld activities. This keeps the spot weld size consistent and regular in appearance.

Once the trigger or foot pedal is pressed, the arc will come on and go out after the time set has expired. This helps to keep things fool proof. The second and completely new feature is the Fast Tack feature. This is a "micro burst" of welding power that initiates the arc, and gives a very short but powerful surge of power. This is perfect for tacking and welding very thin and delicate pieces of metal.

This is the first unit from Everlast to offer this feature, making it a clear choice for those hobby fabricators and small garages that have a wide range of welding activities. With the improved design and performance, the Ultra-Arc has no parallel or competition for that matter. Where else will you find a plasma that is capable of cutting up to 3/4 included with a DC TIG and Stick welder for a price like this? All-in-one portability offers new solution for small garages, farms, and portable welding activities.

Compact design allows the unit to go anywhere Straight forward controls, with 3 Pulse settings and adjustable Pulse Frequency. Quick change out of torches for easy change from TIG to plasma back to TIG. Improved reliability due to completely new digital inverter design.

High duty cycle of 60% at Max Rated Amperage for TIG. 35% for Stick and Plasma at Max Rated Amperage.

Front air pressure gauge for easy verification of air pressure. Over Current/Duty cycle protection circuit warns and interrupts welding/cutting to ensure safe, and long life operation. Clean and smooth plasma cuts on virtually any metal. Welds Steel, Stainless Steel and Titanium The PowerUltra is DC output only, and is not suitable for welding Aluminum, although it can cut aluminum.

Advanced TIG functions for DC TIG welding. 3 Pre-Programmed Pulse functions with adjustable Pulse Frequency. Dual voltage design allows unit to be operated on 120V or 240V. Output is reduced in 120V operation to approximately 125 amps TIG/ 95 amps Stick/25 amps plasma. 26 Series Air-Cooled Everlast TIG Torch with DINSE Style connector.

Stick Electrode Holder and 10ft. Cable with DINSE Style connector. S-45 Plasma Torch with DINSE Style connector Work Clamp with 10ft. Cable and DINSE Style connector.

Air Regulator for Plasma TIG Ar/Gas. Regulator Consumable Starter Kit for TIG and Plasma. 240V to 120V adapter for 120V use. 12.5 ft CK 26 Trimline torch with Superflex cables.

Note: Unit is not recommended weld aluminum with TIG. It supplies DC output only. IMPORTANT PRODUCT NOTES: While under foot pedal control, the maximum amps are not limited on the panel. The foot pedal controls the full range of amps, from 5 to 200 amps. Although the pedal can control the amps through varying the pedal position, no lower maximum amps than 200 may be set.

The pulse offers simple pulse control of the TIG (specification subject to change). The UltraArc 205 is an entry level DC output multi-purpose welder/cutter and cannot weld aluminum.

However, it can be used to cut aluminum. For work requiring aluminum welding and cutting, see our PowerPro units.

TO SWAP BETWEEN PROCESSES, CABLES AND GAS LINE SUPPLY CHANGES MUST BE MADE. THE UNIT CANNOT OPERATE MULTIPLE PROCESSES SIMULTANEOUSLY. Plasma Cutting capability with dry air, new consumables, proper air pressure etc. Quality and capacity of cut depends upon consumable orifice size, standoff height, travel speed, etc. If there is damage, we can help file a damage claim immediately. These packages will be refused and sent back to YOU at your cost. We will do our best to expedite backordered items as soon as possible.

3- Please provide a physical address. The item "UltraArc 205 200 Amp Pulse DC TIG Stick 50 Amp Plasma Cutter Combo Dual Voltage" is in sale since Thursday, April 9, 2020. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\Multiprocess Welders & Cutters".

The seller is "fox_merchand" and is located in Daly City, California. This item can be shipped to United States.

Power Source: 110/220V Electric
Model: UltraArc205
Processes: Plasma, TIG, Arc
Modified Item: No
Custom Bundle: No
Item Type: TIG/Stick/Plasma 3 in 1 Combo Welder
Current: 1 Phase
Multi-Process: Yes
MPN: UltraArc205
Brand: Everlast