As a part of the Multi-Process TIG/Stick/Plasma line of IGBT inverter welders from Everlast, the PowerUltra 205 is ultra useful around home shops and small garages as an all around welder and plasma cutter combination. The welder component features DC output in TIG and Stick modes and is useful for welding all types of metals except aluminum and magnesium. In TIG mode the unit features a simple 2 position pulse with a.
5 and 25 hertz fixed setting. The plasma cutter can handle all types of metal and can regularly cut plate metal up to 1/2" thick with a clean cut capacity of up to 3/4". If you are looking for a simple solution to your steel and stainless welding and cutting needs, the PowerUltra 205 offers a compact alternative to purchasing separate separate units. All-in-one portability for portable repair operations. Compact design allows the unit to go anywhere Straight forward controls, with two preset pulse settings for easy TIG operation.Quick change out of torches for easy change from TIG to plasma back to TIG. Low power consumption due to inverter design.
High duty cycle of 60% at rated amperages for TIG/Stick/Plasma. Front air pressure gauge for easy verification of air pressure. Over Current/Duty cycle protection circuit warns and interrupts welding/cutting to ensure safe, and long life operation. Clean and smooth plasma cuts on virtually any metal.
Welds Steel, Stainless Steel and Titanium The PowerUltra is DC output only, and is not suitable for welding Aluminum, although it can cut aluminum. Great arc stability for TIG/Stick functions due to IGBT inverter design. 2 preset pulse settings of.
Dual voltage design allows unit to be operated on 120V or 240V. Output is reduced in 120V operation to approximately 125 amps TIG/ 95 amps Stick/25 amps plasma. 26 Series Air-Cooled Everlast TIG Torch with DINSE Style connector.Stick Electrode Holder and 10ft. Cable with DINSE Style connector. S-45 Plasma Torch with DINSE Style connector Work Clamp with 10ft. Cable and DINSE Style connector. Air Regulator for Plasma TIG Ar/Gas. Regulator Consumable Starter Kit for TIG and Plasma. 240V to 120V adapter for 120V use. 12.5 ft CK 26 Trimline torch with Superflex cables. Note: Unit is not recommended weld aluminum with TIG.
It supplies DC output only. IMPORTANT PRODUCT NOTES: While under foot pedal control, the maximum amps are not limited on the panel. The foot pedal controls the full range of amps, from 5 to 200 amps. Although the pedal can control the amps through varying the pedal position, no lower maximum amps than 200 may be set.
The pulse is preset to offer simple pulse control of the TIG with two basic settings. 5 Hz, and 25 Hz.
(specification subject to change) The PowerUltra 205 is an entry level DC output multi-purpose welder/cutter and cannot weld aluminum. However, it can be used to cut aluminum. For work requiring aluminum welding and cutting, see our PowerPro units. TO SWAP BETWEEN PROCESSES, CABLES AND GAS LINE SUPPLY CHANGES MUST BE MADE. THE UNIT CANNOT OPERATE MULTIPLE PROCESSES SIMULTANEOUSLY.
Plasma Cutting capability with dry air, new consumables, proper air pressure etc. Quality and capacity of cut depends upon consumable orifice size, standoff height, travel speed, etc. If there is damage, we can help file a damage claim immediately. These packages will be refused and sent back to YOU at your cost.We will do our best to expedite backordered items as soon as possible. 3- Please provide a physical address. The item "PowerUltra 206Pi 200AMP PULSE DC TIG STICK WELDER 50amp plasma cutter 1" is in sale since Monday, May 7, 2018. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\Multiprocess Welders & Cutters". The seller is "fox_merchand" and is located in Daly City, California. This item can be shipped to United States.