Gas MIG/Gasless MIG/Lift TIG/Stick/CUT 5 in 1 Welder. Can take up to 0.9mm. 035 MIG solid wire(Gas MIG) and 0.9mm. 035 MIG FLux wire(Gasless MIG).
Smart Memory & System Reset. Synergic Controlled on MIG function, very easy and simple operation.Product Dimensions: 20.08"11.02"6.10. Supply Voltage: 110V/220V 50/60 Hz. Pre/Post Flow Time (CUT): 10s. Can apply to 2 and 10 pound rolls of wire.
Welding Material: Carbon Steel, Stainless Steel. 4.3 high-pixel LCD control screen that quickly and easily walks the user through setup, smoothly flow through the on-screen menu system and choose the setting. Digital control to choose welding mode, material, welding wires, tungsten rods, electrode and workpiece thickness.
Color LCD display easy to read and set amperage and wire speed for repeatable welds every time. The smart Memory function allows you to store the voltage and current settings that match your style under memory numbers.The memory number can be recalled to reveal and use the weld parameters stored, and weld parameters can be further adjusted and stored as required. Up to 10 memory options for each type of welding can be memorised and stored for recall. Full Synergic Option: with automatic change of the voltage & wire feeding speed by choosing different thicknesses or amperage.
The wire feed speed will be well fit with the amperage with micro-adjust voltage. "Out Range" warning: if the amperage/ wire speed is not relative to the MIG setting, the thickness will automatically change to the related ones. Burn Back Control: Allowing burn back time adjusting during the weld, suitable to different welding requirement. Equipped with a TIG torch and easy to initiate arc ignition. Supplying stable controllable consistent arc, suitable for small or intricate welding projects.
Allowing clean and quiet, virtually smoke-free welding with 100% Argon. The preflow is a purge feature to insure there is airflow at the tip to become a charged plasma stream and benefit for blowing clean cuts. Postflow is primarily for cooling. The longer the cut at high amp on thick metal, the more post flow need to dissipate the heat.Recommend air pressure: 58-72 PSI. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\MIG Welders". The seller is "stoneybrooksales" and is located in this country: US. This item can be shipped worldwide.