Plasma Cutter Tig

Plasma Cutter Stc 205 Ac/dc Pulse Tig-plasma-mma Inverter Welder Olympic

Plasma Cutter Stc 205 Ac/dc Pulse Tig-plasma-mma Inverter Welder Olympic
Plasma Cutter Stc 205 Ac/dc Pulse Tig-plasma-mma Inverter Welder Olympic
Plasma Cutter Stc 205 Ac/dc Pulse Tig-plasma-mma Inverter Welder Olympic
Plasma Cutter Stc 205 Ac/dc Pulse Tig-plasma-mma Inverter Welder Olympic
Plasma Cutter Stc 205 Ac/dc Pulse Tig-plasma-mma Inverter Welder Olympic
Plasma Cutter Stc 205 Ac/dc Pulse Tig-plasma-mma Inverter Welder Olympic

Plasma Cutter Stc 205 Ac/dc Pulse Tig-plasma-mma Inverter Welder Olympic

C H R I S T M A S S A L E! STC-205 AC/DC is Built on the Same base as our Olympic Master Tig 250 ac/dc, The STC-205 Is a 200Amp AC/DC Tig Welder with a built in 50Amp Pilot Arc plasma Cutter. Its a Precise Aluminium Welding Specialist that suits all welded Materials.

Modular Design allows you to build the package that best Suits your needs. If you are after the Complete Combo Machine this is all you will need! Easy Operation and full functions Allowing fast Adjustment for all Necessary Controls for DC, AC Tig Welding with HF Start. This machine also has memory Settings to allow you to save your settings like our Master Series 250 ac/dc. Single Phase STC-205 AC/DC Inverter Pulse TIG-PLASMA-MMA INVERTER Welder comes complete with: WP-26 4MTR TIG TORCH.

TRAFIMET STYLE CB-50 6 METER CUTTING TORCH. AIR PRESSURE REGULATOR WITH GAUGE. PLEASE MESSAGE IF YOU WOULD LIKE THIS ADDED ON AND WE CAN SEND YOU AN INVOICE FOR THE TOTAL WITH MACHINE AND FOOT PEDAL. Water-cooling unit: POA WC-100 Operating Voltage:230V 50/60Hz Rated Power:260W Cooling Power:1.5KW(1L/MIN) Tank Volume:6.5L.

PLEASE MESSAGE FOR PRICING ON THIS WATER COOLER ETC OR CALL ON 0434 627 999. Welding Current Range - 5A - 200A Peak Current - 5A - 250A Base Current - 5A - 200A Pulse Frequency - 0.2Hz - 200Hz Pulse Width (Ratio) - 1-100% Ac Frequency Range - 20Hz - 200Hz Ac Clean With (Ac Balance) +40/-40 Ac Clean Ratio (Ac BIAS) % - +30/-50 Mix Frequency - 0.1Hz - 5Hz Dc Balance (%) 20-80 Arc Starting Current - 5A - 200A Crater Filling Current - 5A - 200A Current Up-Slope Time - 0.1s - 15s Current Down-Slope Time - 0.1s - 15s Pre Gas Time - 0.1s - 15s Flow Gas Time - 0.1s - 15s Spot Arc Time - 0.1s - 10s MMA: Arc Force - 10A - 160A Hot Start Time - 1-3s Hot Start Current - 10A - 160A Dimensions: 51 x 23 x 45cm PLASMA. Required Air Pressure - 0.3 - 0.5MPA.

Gas Pro Flow/Retard Time - 0.1s - 15s. Quality Cutting Thickness - 15mm.

Severance Cutting Thickness - 22mm. Now starts DC(-) to maintain a sharp tungsten. HF START : Non touch start to decrease tungsten loss.

Adjustable AC output frequency allows the operator to focus the arc minimizing the heat affected zone. Extended AC Balance Control helps maintain a pointed tungsten to direct the arc in the weld joint. Independent amplitude/amperage control allows EP and EN amperages to be set independently to precisely control heat input to the work and electrode. Standard Square wave for fast travel speeds and excellent puddle control. Sine Wave: for traditional softer sounding arc, AC current and DC current in one duty cycle.

MIX TIG: we can get an excellent Arc Concentration, can be carried out with excellent welding performance from thin to thick plate. Program memory features 10 independent program memories that maintain/save your parameters. When enabled from the set up menu reduces the open circuit voltage in STICK mode for use in electrically hazardous conditions or when the use of a VRD is required. Auto-reconnects for single phase 115/230V 50/60 Hz input allows the? Exibility to weld in the shop or take in the?

Eld where 230V may not be available. Weighs in at a mere 20kg making it easy to carry around the shop or job site. Pilot Arc for superior arc performance and easy Start. HF or NON-HF Arc Ignition: Reliable Plasma Arc initiation Without High Frequency. Continuous Output Control: Focus the arc for different Material Thickness.

Rapid Arc Restrike: Fast Cutting Through Gaps, Even Expanded metal. For TIG and Stick Welding Aluminum welding expert, precise and ef? ALL PRODUCTS ARE PREMIUM INDUSTRIAL QUALITY! A INDUSTRIAL SUPPLIES IS A LOCAL INDUSTRIAL AND HARDWARE SUPPLIER WE HAVE A LARGE RANGE OF WELDING CONSUMABLES, MACHINES AND ACCESSORIES.

SAFETY EQUIPMENT, FULL RANGE OF HIGH QUALITY PREMIUM LEATHERS ETC GRINDING, CUTTING, SANDING DISCS ALL OF HIGH PREMIUM QUALITY AT THE BEST PRICES WE WONT BE BEATEN ON PRICE OR QUALITY! This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders". The seller is "waindsupp" and is located in this country: AU. This item can be shipped to United States.

  • Brand: OLYMPIC
  • Custom Bundle: No
  • Item Type: Inverter Welder
  • MPN: STC 205 ACDC
  • Modified Item: No
  • Non-Domestic Product: No
  • Polarity: AC/DC
  • Welded Material: Aluminium
  • Welder Industrial Class: Medium
  • Welding Process: Pulsed TIG


Plasma Cutter Stc 205 Ac/dc Pulse Tig-plasma-mma Inverter Welder Olympic