NEW PowerPlasma 62i, 60 Amps, CNC Option, Plasma Cutter with IPT-60 torch
If you are wanting more power, unquestionable cut quality, and reliabilty in a plasma cutter, but you just can't justify spending your green for something that is gray, the PowerPlasma 62i is the answer. As the all new replacement for the ever popular PowerPlasma 60S, the PowerPlasma 62i has been built around a reliable, tested all digital inverter platform. This allows the unit to do more with less circuitry and points of failure than ever before. This plasma cutter though has kept all of the old features and added many new ones, so nothing was sacrificed in the way of features. The display has been upgraded to offer large, easy to read numbers even in bright light.
The new addition of digital readouts for both the Post-Flow time and the Air-Pressure has added to the plasma cutter's operator oriented design. Along with a digital display for the air pressure, the unit features an color coded LED guide system that helps you to properly set the air pressure for each cut mode without having to refer to a chart or manual.
A new gouge feature has been added for cutting out metal defects and old welds. Also, a separate function has been added for CNC operation. Easy starting with Blow Back Pilot arc allows easy cutting of rusty and painted metals. Digitally controlled design that closely manages cutting arc. Super bright displays, readable in bright light conditions.
Cuts virtually any type of metal with ease. Simple to use torches with inexpensive service parts and consumables. Commercial class, 60% Duty cycle at 60 amps. Clean, smooth cuts with the genuine iPT 60 Torch. Blowback start starts are fast and reliable.
Pilot arc improves performance and cutting on dirty, painted, or rusted metals. 3 Second pilot arc tip saver feature shuts down pilot arc after 3 seconds of continuous operation if no cutting is present to prevent premature consumable wear. Digital Air Pressure Display, and LED Air Pressure guide system adapts to different cut modes for best air pressure setting without consulting a manual or chart. Adjustable postflow timer with digital display for maximum consumable life and ease of use. The name brand IGBT's are digitally controlled which increases cut quality and consumable life. CNC socket and new, separate CNC cut mode for CNC use on plasma tables (machine torch optional). Suitable for use with 11,000 W "clean power" generators. Italian designed and patented iPT-60 torch with Euro quick-connect central adapter. Air pressure regulator/water trap (Separate air dryer is required to reduce consumable wear and prevent torch damage). Virtually any metal including cast iron. Maximum Rated (I1EFF) Input Amps. Duty Cycle At Rated Amps/Volts. OK-to-Cut Indicator/Low Air pressure safety.To improve consumable life and prevent torch damage, the customer must supply and install a separate air dryer inline in addition to the regulator/water trap supplied by Everlast. The water trap Everlast supplies with the unit is not designed to remove all moisture from the air.
For more generator information and recommendations, consult the manual. Use a generator that is rated for a minimum of 10,000 surge watts. Plasma cutting capacity is affected by several factors. Ideal cutting conditions require dry air, new consumables, proper air pressure etc. Quality of cut depends upon consumable orifice size, standoff height, and travel speed. If there is damage, we can help file a damage claim immediately. These packages will be refused and sent back to YOU at your cost. We will do our best to expedite backordered items as soon as possible. 3- Please provide a physical address.