Plasma Cutter Tig

CT520DF Plasma Cutter TIG ARC STICK MMA Welder Welding Machine 220V 3-in-1

CT520DF Plasma Cutter TIG ARC STICK MMA Welder Welding Machine 220V 3-in-1
CT520DF Plasma Cutter TIG ARC STICK MMA Welder Welding Machine 220V 3-in-1
CT520DF Plasma Cutter TIG ARC STICK MMA Welder Welding Machine 220V 3-in-1
CT520DF Plasma Cutter TIG ARC STICK MMA Welder Welding Machine 220V 3-in-1
CT520DF Plasma Cutter TIG ARC STICK MMA Welder Welding Machine 220V 3-in-1
CT520DF Plasma Cutter TIG ARC STICK MMA Welder Welding Machine 220V 3-in-1
CT520DF Plasma Cutter TIG ARC STICK MMA Welder Welding Machine 220V 3-in-1
CT520DF Plasma Cutter TIG ARC STICK MMA Welder Welding Machine 220V 3-in-1
CT520DF Plasma Cutter TIG ARC STICK MMA Welder Welding Machine 220V 3-in-1
CT520DF Plasma Cutter TIG ARC STICK MMA Welder Welding Machine 220V 3-in-1

CT520DF Plasma Cutter TIG ARC STICK MMA Welder Welding Machine 220V 3-in-1
Einfacher und zuverlässiger Touch-Start-Mechanismus, einfach zu bedienen. Hohe Lichtbogenenergie, weniger Verschmutzung und Brennen, selten Schweißverformung. Sichere Luftkühlung und Thermostatschutz, geeignet für Heimwerker alle Ebenen Benutzer. Kontinuierliche Ausgabesteuerung fokussiert den Bogen auf unterschiedliche Materialstärke. Kann 1-8 mm Schneidstärke behandeln. Eine professionelle Maschine, geeignet für Mehrfachanwendungen wie Weichstahlherstellung, leichte industrielle Anwendung, Standortschweißen, Maschinenreparatur und Wartungsanwendungen. Current ranget(A): TIG(10-120); MMA(10-120); CUT(10-30). Rated output current(A): TIG(120); MMA(120); CUT(30). Input current(A): TIG(13); MMA(22); CUT(21). No load(V): TIG(55); MMA(55); CUT(220). Work voltage(V): TIG(14);MMA(24); CUT(92). Eingangsspannung (V): AC 220 V ± 10% 50 (Sing-Phase). Wirkungsgrad (%): 80; Leistungsfaktor : 0,93. Eingangsleistung Kapazität (KVA): 4,8.

Einschaltdauer%: 60; Leerlaufverlust (W): 40. 1X MMA Klemme & Kabel. Wear approved gear, jackets, pants, boots, gloves etc. Do NOT wear wet or damp clothing.

Do NOT use near combustibles or explosives. Do not inhale fumes produced by this machine. Only use in an area with approved ventilation. Flying sparks may cause fire and burns. Protect yourself, others, and the area from flying sparks.

Always have a fire extinguisher nearby. Be aware that cutting on a ceiling or floor can cause fire on the opposite side. Never cut closed containers such as drums or tanks, this may result in explosion. Connect the ground cable as close to the work as possible. Never cut a container with anything inside, this could result in explosion or fire. Never cut a pressurized pipe, cylinder or vessel. Follow all OSHA and NFAP requirements/regulations. Inspect all connections and cables before and after each use. Do not use the equipment if damage is present.

Insulate work clamp when not attached to the work. Turn off equipment when not in use. Never touch live electric parts. Insulate yourself from the ground with proper protection.

Do NOT touch the torch's parts if its in contact with the work or ground. Disconnect the machine from its input power supply before servicing, checking or cleaning. Cutting may cause fire and explosion.


CT520DF Plasma Cutter TIG ARC STICK MMA Welder Welding Machine 220V 3-in-1